\r\n
\r\n
\r\n
\r\n \r\n \n\n\r\n \r\n \r\n \r\n \n
\r\n\n\r\n \r\n
\r\n \r\n \r\n
\r\n \r\n \r\n \r\n \r\n
\r\n \r\n \r\n
\r\n \r\n
\r\n \r\n
\r\n
\r\n
\r\n \r\n \r\n \r\n
\r\n
\r\n
\r\n I\'m installing a Garmin Montana and purchased the 3 wire connector which attaches to the spare Can Bus outlet next to battery. It wasn\'t tough to find out which is positive but the remaining 2 wires both complete the circuit. Can I use either one as negative/ground? There are no markings on the connector or wires.
\r\n2010 F800GS\r\n
\r\n
\r\n\r\n \r\n
\r\n
\r\n \r\n
\r\n
\r\n
\r\n \r\n
\r\n\r\n\r\n\n\n\n\n';
pd[795561] = '\n\n\r\n
\r\n\r\n\r\n \r\n \r\n
\r\n \r\n 03-23-13\r\n \r\n \r\n
\r\n \r\n #2\r\n \r\n \r\n \r\n \r\n \r\n
\r\n
\r\n
\r\n \r\n \n\n\r\n \r\n
\r\n \r\n \n
\r\n\n\r\n \r\n
\r\n \r\n \r\n
\r\n \r\n
\r\n \r\n \r\n \r\n \r\n
\r\n \r\n \r\n
\r\n \r\n
\r\n \r\n
\r\n
\r\n
\r\n \r\n \r\n \r\n
\r\n
\r\n
\r\n 1) positive
\r\n2) rpm pickup
\r\n3) negative
\r\nIf memory serves\r\n
\r\n
\r\n\r\n \r\n
\r\n
\r\n \r\n
\r\n
\r\n
\r\n\r\n\r\n\n\n\n\n';
pd[796297] = '\n\n\r\n
\r\n\r\n\r\n \r\n \r\n
\r\n \r\n 03-23-13\r\n \r\n \r\n
\r\n \r\n #3\r\n \r\n \r\n \r\n \r\n \r\n
\r\n
\r\n
\r\n \r\n \n\n\r\n \r\n
\r\n \r\n \n
\r\n\n\r\n \r\n
\r\n \r\n \r\n
\r\n \r\n
\r\n \r\n \r\n \r\n \r\n
\r\n \r\n \r\n
\r\n \r\n
\r\n \r\n
\r\n
\r\n
\r\n \r\n \r\n \r\n
\r\n
\r\n
\r\n \n\r\n
\r\n
\r\n
\r\n \r\n
\r\n
Originally Posted by
tinpusher\r\n
\r\n
\r\n
I\'m installing a Garmin Montana and purchased the 3 wire connector which attaches to the spare Can Bus outlet next to battery. It wasn\'t tough to find out which is positive but the remaining 2 wires both complete the circuit. Can I use either one as negative/ground? There are no markings on the connector or wires.
\n2010 F800GS
\r\n \r\n
\r\n
\r\n
\r\n
\r\n\r\n \r\n
\r\n
\r\n \r\n
\r\n
\r\n
\r\n\r\n\r\n\n\n\n\n';
// next/previous post info
pn[794458] = "796297,795561";
pn[0] = ",794458";
pn[795561] = "794458,796297";
pn[796297] = "795561,794458";
// cached usernames
pu[0] = guestphrase;
pu[21960] = "tinpusher";
pu[19439] = "PegasusJockey";
pu[22781] = "Slappyhamguy";
// -->
-
I'm installing a Garmin Montana and purchased the 3 wire connector which attaches to the spare Can Bus outlet next to battery. It wasn't tough to find out which is positive but the remaining 2 wires both complete the circuit. Can I use either one as negative/ground? There are no markings on the connector or wires.
2010 F800GS
\r\n 
\r\n \r\n \r\n \r\n 
Reply With Quote
Your Privacy Choices
Bookmarks