-
Originally Posted by
justmike
Apologies again for the late reply - was away at the races
Same story on the windshield - I had stock "S" and "ST" windshields but they are both gone.
Thanks for looking.
Hi Mike
I bought the centerstand and foot peg from you last year and I was very happy, now I am looking for
-RIGHT TRIM PANEL PRIME COATED GREY
-RIGHT MIRROR
-RIGHT BRAKE LEVER
-RIGHT FRONT TURN SIGNAL HOUSING
-RUBBER STRIP RIGHT (SPORT CASE RIGHT)
-HANDLEBAR ENDS
Please let me know if you still have.
Cheers
Sea
-
-
Hi Sea,
Sorry for the late reply - just got back from a couple of days at the cottage ( no internet ). I'll check on your list in the morning. Is that a front or rear trim panel?
I can tell you right now that I don't have the rubber strip for the case or the bar ends.
-
Okay, just checked on this stuff. I have a front right trim panel for the "S" in red, and a rear trim panel for "S" and "ST" in red, also left rear trim panel in red.
I have only the left mirror.
No brake lever.
I have only the left front turn signal housing.
No rubber strip for case.
No bar ends.
PM me if you're interested in either of the trim panels and I'll send you some photos.
-
-
Hi Mike
I envy you, being on cottage for no internet, being offline is a luxury nowadays. That is the right front panel (the biggest panel goes from headlight to seat).
-
Yeah, being "off-line" sure frees up your day
Sorry, I was thinking the lower trim panel. I don't have the upper that you are referring to. Hope you can find a good used one. New panels from BMW are crazy expensive.
Originally Posted by
seakeeper
Hi Mike
I envy you, being on cottage for no internet, being offline is a luxury nowadays. That is the right front panel (the biggest panel goes from headlight to seat).
-
What color was the bike? And do you have the right hand side fairing?
-
Originally Posted by
gertler
What color was the bike? And do you have the right hand side fairing?
The remaining parts I have are red and are from an "S" model. Right side front lower, and both rear side pieces.
-
How much for handlebars?
Cables?
Thanks
inidtx
-
HI Mike,
Right heated grip available?
Thanks, Philip
-
PM sent.
Originally Posted by
inditx
How much for handlebars?
Cables?
Thanks
inidtx
-
Sorry Phil, I don't have one.
Originally Posted by
Philip Doyle
HI Mike,
Right heated grip available?
Thanks, Philip
-
I know old post but though it might be worth a try, do you have headlight for 2013 F650GS? I am in the market since mine is of the vintage that is losing its reflecting behind the bulb.
-
Originally Posted by
JED
I know old post but though it might be worth a try, do you have headlight for 2013 F650GS? I am in the market since mine is of the vintage that is losing its reflecting behind the bulb.
Sorry Jed, I don't have that.
-
BUMP
Lots of parts still available - front calipers with pads (2 sets), rear caliper with pads, front and rear master cylinders, forks, electrical, front wheel, front axle, steering damper, throttle body w/injectors, starter, abs pump, throttle cables, clutch cable (2), swing arm, rear hub (2), fuel pump (2), exhaust header, etc. etc.etc.
Last edited by justmike; 09-27-21 at 05:54 PM.
-
Hello, do you still have a fuel pump?
-
Originally Posted by
BigG
Hello, do you still have a fuel pump?
Yes, I have a couple of them. I’ve sent you a PM.
-
Is the mirror stem to mounting base the same as the 2008 model?
If so I would like to buy either mirror, I need the bolt and nut that connects the stem to the mount.
Thank you, Jim
-
Hi Mike,
I'm looking for a few parts for my 2007 F800S.
Short list so far:
Left front turn signal housing
Under seat tool kit
Windshield
As I pull more stuff off, the list may grow, so I'm sending a PM with my email.
Thanks!
Rod
-
Sorry Jim, but I have no more mirrors left.
Originally Posted by
Jim.0
Is the mirror stem to mounting base the same as the 2008 model?
If so I would like to buy either mirror, I need the bolt and nut that connects the stem to the mount.
Thank you, Jim
-
e-mail sent
Originally Posted by
rodzghost
Hi Mike,
I'm looking for a few parts for my 2007 F800S.
Short list so far:
Left front turn signal housing
Under seat tool kit
Windshield
As I pull more stuff off, the list may grow, so I'm sending a PM with my email.
Thanks!
Rod
-
Originally Posted by
justmike
All parts for sale. PM me with your e-mail address for a complete list of parts and prices. Prices are in $CDN. and do not include shipping. Offers considered.
Hi, how do I send a PM to you? I wonder if the front wheel fits all F800. I have a F800R 2011. Thanks.
-
I am interested in the headlight assembly.
-
FWIW, here’s a list of the parts I have left. Make an offer:
Front Brake Rotors (1 pair)
Front Brake Calipers ( 2 sets w/pads)
Front ABS Sensor Ring
Rear Brake Disc
Rear Brake Caliper
Rear ABS Sensor Ring
Rear Master Cylinder (2 sets)
ABS Modulator
Starter Motor
Starter Relay
Voltage Regulator
Exhaust Collector
Oxygen Sensor
Side Stand (with switch)
Side Stand Switch
Belt guard Set
Footrest Plate Right
Footrest Plate Left
Throttle Body Ass'y w/injectors
ECU Control Unit
Intake Snorkel
Main Wiring Harness (2 sets)
Tail Wiring Harness (2sets)
Horn
Rear Stoplight Switch
Turn Signal Lights (1 vg condition, 1 rough but not broken)
Rear Tail Light
Radiator complete w/fan
Radiator Fan
Radiator Hoses - (2 pcs.)
Rear Swingarm
Swingarm Pivot
Rear Belt Wheel
Rear Drive Hub (2 units)
Rear Belt Wheel Adapter
Rear Drive Dog and (4)Absorber
Front brake master cylinder(no lever)
Clutch Cable
Steering Damper
Front Axle
Coolant Overflow Tank - (2 units)
Last edited by justmike; 09-27-21 at 05:55 PM.
-
Bump - quite a few parts still available. Let me know what you’re looking for.
-
Originally Posted by
justmike
Bump - quite a few parts still available. Let me know what you’re looking for.
I know these items are not on your list but thought I would run them by you anyway. I have a 2010 F800GS and assume they are basically the same as far as frame and attachments go. I am looking for the foot pegs for the passenger both sides. For whatever reason, a previous owner removed them and they are long gone. Do you have these? and can you confirm they would be the same on your bike as mine? If so, what are you looking to get for them? Tkx.
-
Hi Randy,
Sorry - notification just came through this morning! Maybe the system takes the weekends off �� In any case, my apologies.
I don’t have any footpegs left, they went pretty early on. Your GS pegs are not the same as the S/ST pegs-or at least, the part numbers are different.
Here’s a link for part numbers if that helps:
https://shopmotorrad.bmwtoronto.ca/a...m/46_1135.html
-
Thanks Mike. They are an awful price new for what they are. I will do without at those prices. I never ride with a passenger but on the type of road one might be riding on an adventure bike, it is wise to have the ability to have a passenger should you run into a breakdown situation way out someplace like Tucktoyaktuk. There is not a hell of a lot of traffic up that way for hitchhiking.
-
Might you have a skid/bash plate for a 2009 F650GS twin?
Originally Posted by
justmike
Bump - quite a few parts still available. Let me know what you’re looking for.
-
Originally Posted by
johnsonbj
Might you have a skid/bash plate for a 2009 F650GS twin?
Sorry, I don’t.
-
Hi Mike,
I would be interested in the handlebars if you still have them. I'm also in Ontario, near Hamilton. If you're in the area pick up may be an option otherwise shipping would be fine.
Thanks very much,
Mark
-
Sorry Mark - the ST bars are gone.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks